BevRC
UNIVERSAL RC SHUTTER
The universal RC shutter only need one channle of your radio, support below DC or DV:, Nikon:, D5100,D7000,D5000,D3000,D90,D80,D70s,D70,D60,D50,D40X,D40,F75,F65,F55,N65,D600,D3200,P6000,CP8800,8400,100WQD,150ED,140ED,130ED,110s,70Ws, Canon:, G10,G11,G12,G1X,EOS 1000D,1100D,60D,600D,650D,550D,500D,450D,400D,350D,300D,5D Mark III 5D Mark II 7D G9 G7 G6 G5 G3 G2 G1 S1is S70 S60 Pro90IS 300v 300x 3000vQD IXUS Jr/II/III 30V 30 33 50 300, Sony:, a33 a55 a65 a77 a230 a290 a330 a390 a450 a500 a550 a560 a580 a700 a900 NEX5C, OLympus:, E1 E3 E10 E20 E300 E330 E400 E410 E420 E450 E500 E510 E520 E2100 E2500 E100PS Stylus300 Stylus400 Stylus410 Stylus500 Stylus800 D40ZOOM C2100Ultra ZOOM C4040ZOOM C7000Ultra ZOOM C770Ultra ZOOM E5,
You may have some RC shutter for your DC or ...BevRC
SKYWALKER 1900 FPV RC AIRPLANE
| Length | 1180mm |
| Wingspan | 1900mm |
| Flying weight | 1880g |
| Battery | 5000ma 4s |
| Motor | 2814 |
| Esc | 40A |
| Propeller | APC9060E |
| Radio | 4CH 4SERVO |
Kv:980,
SpecificationBevRC
FC40 CAMERA FOR DJI PHANTOM FC40 RC QUADCOPTER
| Image sensor | HD720P/30FPS |
| Resolution | 1280x720 |
| Lens | Aperture F2.2 |
| FOV | 100 degree wide angle |
| Focal Range | 25cm to infinity |
| Wireless | IEEE802.11 B/G Compliant |
| Wireless Mode | Direct Mode |
| Mobile Wi-Fi Video Size | WQVGA |
| Storage | Micro SD/SDHC/SDXC up to 64GB |
| Battery | Built-in 700mAH Lithium Ion Battery |
| Package Included | 1 x Camera |
FC40 Camera Specification:,
BevRC
UPDATING KIT FOR FY31AP----GCS EDITION WITH FY605 DATA RADIO
Package content:, , System Requirement (you’ll need these get the system going):, , • Two RC Receivers to operate this system:, - One on board your aircraft (minimum 6 channels),
This Pack Contains a set of Data Radio hardware, FY3ZT ...BevRC
LOTUS T580 (NEWEST VERSION)
| http | //www.rcgroups.com/forums/showthread.php?t=1384681 |
| Reviews | http |
| and http | //www.rcmodelreviews.com/lotus_t580_review.shtml |
The support thread here:,
. If you are looking for a stable, easy to ...BevRC
FRSKY TFRSP- FUTABA FASST COMPATIBLE WITH SPPM AND RSSI PORT
| FASST 2.4G Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc. |
| Number of Channels | up to 10 channels (CPPM for CH1~CH9, servo signal for CH5~CH10) |
| Operating Voltage Range | 3.5V~10V |
| Operating Temperature Range | -10℃~60℃ |
| Dimension | 53mm*30mm*11mm |
| Weight | 13.5g |
| Note | Increased duty means good signal reception, and vice verse. |
1.1 Compatibility:, 1.2 Specifications:, Warning: Servos are not to be plugged into Channel CPPM and Channel RSSI, otherwise servos will get hot or may burn out., 2.1 Bind procedure:, Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally., 2.2 Setting failsafe:, TFRSP supports failsafe function for all channels. Follow the steps below to set failsafe:, 1) Bind the receiver first, and disable failsafe on the transmitter side;, Warning: Some transmitter manufacturers use a failsafe method that can interfere with that used by FrSky. Be sure to disable any transmitter failsafe settings before setting FrSky failsafe positions. Unusual jitter may result otherwise., 2.3 LED status:, , Please find the how-to guide with the file named “Set up FrSky as a wireless trainer system” via the following link:, www.frsky-rc.com/download.asp?id=23,
Can be used with YS-X4 through one cable, using the ...BevRC
FRSKY BATTERY VOLTAGE SENSOR LITE
| FrSky D series accessories | serial cable |
| http | //www.frsky-rc.com/download.asp |
Introduction:, FrSky Battery Voltage Sensor is provided as Two Way Telemetry System’s Optional Accessory. There are three voltage ranges to choose: 1S lipo for battery voltage range from 0V~6.6V, up to 3S lipo for 0V~13.2V and up to 5S lipo for 0V~19.8V. Please check the battery voltage division ratio for each option below:, Recommended Voltage Option Max Lipo Pack Count Battery Voltage Division Ratio, 1S 1S 2:1, 2S 3S 4:1, 3S 5S 6:1,
Product Show FBVS-01 Category：Accessories Description More detail：BevRC
FRSKY AMPERE SENSOR-100A
| Dimension | 38*30*10mm |
| Weight | 24g |
| Measurement range | 0~100A |
| Maximum safe current | 100A |
| Sensor current consumption | 33mA |
| Update Rate | ≥1Hz |
| Model | FAS-100 |
| Dimension | 38*30*10mm |
| Weight | 24g |
| Measurement range | 0~100A |
| Maximum safe current | 100A |
| Sensor current consumption | 33mA |
| Update Rate | ≥1Hz |
| Note | When FAS-100 is used with a sensor hub, please make sure the sensor hub is V2.0. |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
3.1 When using the FAS-100, without a FLVS-01:, 3.1.1Connect “Data Out” port of the FAS-100 directly to the “Volt” port on sensor hub using the provided cable., 3.2 When using the FAS-100, with a FLVS-01:, 3.2.1Connect the FAS-100 with, at most, two FLVS-01s and connect the “Data Out” port of FAS-100 or FLVS-01 to the “Volt” port on sensor hub using the provided cable., Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:,
FAS-100 Category：Accessories Description 1. Introduction The FrSky Ampere Sensor (FAS-100) ...BevRC
FRSKY LIPO VOLTAGE SENSOR
| Dimension | 45*21*7mm |
| Weight | 5.2g |
| Measurement range | 1S~6S (The first lipo voltage should be more than 3.55V) |
| Cell voltage display range | 0.20~4.20V |
| Model | FLVS-01 |
| Dimension | 45*21*7mm |
| Weight | 5.2g |
| Measurement range | 1S~6S (The first lipo voltage should be more than 3.55V) |
| Cell voltage display range | 0.20~4.20V |
| Voltage display resolution | 0.01V |
| Voltage detection precision | 0.05V |
| Current of the board | 15.5mA |
| Operating temperature range | -30℃~70℃ |
| Pixel | 128*64 with OLED display screen |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=23 |
| http | //www.frsky-rc.com/download.asp?id=23 |
1. Specifications:, , ﹡Note:, When FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, please refer to below points:, , Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:, Driver for XP/ Win7 Vista:, DHT-U Upgrade ROM_V2.0:, How-to_DHT-U upgrade:,
Product Show FLVS-01 Category：Accessories 2. Set Up 2.1 FrSky Lipo ...BevRC
DJI WOOKONG MULTI (WK-M) MULTIROTOR CONTROLLER WITH GPS
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Introduction:, DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. IMU damping system is rated for gas engine best in the class., Features:, GPS (inclusive) Position, Altitude hold and Heading hold, Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
Attitude mode maintains precise altitude hold for indoor flight while ...BevRC
RC8001 5.8GHZ DIVERSITY HIGH LIGHT HD 7-INCH MONITOR
| - Built-in high performance Li-POLYMER Battery | 2450mAH/7.4V |
| - Work status OSD display | RSSI indication ; Battery indicator; Channel indication |
| - Size | 180mm x 120mm x 50mm（Note |
| - Working Voltage | DC 7~16V |
| - Power Consumption | 650 mA @12V |
| - Battery charging current | 850mA @12V ( max ) |
| - Working temperature | -10℃~+ 65 ℃ |
| - Work status OSD display | Always be aware of the device working condition. |
| Display Parameters | - Screen size |
| - Screen type | TFT LCD Screen/long life, LED backlight |
| - Resolution | 800*480 |
| - Brightness | 450cd/m2 |
| - View Angle | 140/120degree (Horizontal/Vertical) |
| Previous | LD-POWER MT2212 920KV Brushless Motor CW w/White Bullet Cap for DJI Phantom Quadcopter Multicopter |
| Next | DFD F180 2.4G 4 Channel 6-Axis Gyro RC Remote Control 4-Axis Helicopter Quadcopter Deluxe Gold |
| - Work status OSD display | Always be aware of the device working condition |
| - Work Status OSD display | RSSI indication; Battery indicator; Channel indicaton |
| - Size | 180mm X 120mm X 50mm (Note |
| - Working Voltage | DC7-16V |
| - Power Consumption | max 650mA@12V |
| - Battery Charging Current | 850mA@12V (Max) |
| - Working Temperature | 10C ~ 65C |
| LCD5802 Display Parameter | - Screen Size |
| - Screen Type | TFT LCD Screen/ Long life, LED backlight |
| - Resolution | 800 X 480 |
| - Brightness | 450cd/m2 |
| - View Angle | 140/120 degree |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Model Code | TX_5G8_600 |
| Model Name | 5.8GHz 600mW Tx |
| Category | A/V TX & RX |
| Initial Release | 10 Jun 2010 |
Specification:, - Built-in 5.8Ghz Dual diversity receiver automatically for best reception, Features:, - Built-in Dual Receiver Automatically for best reception Automatic Antenna Switching, LCD5802 Features:, - Built in Dual Receiver Automatically for the best reception Automatic Antenna Switching, LCD5802 Specification:, - Built-in 5.8Ghz dual diversity receiver automatically for the best receiption, Immersion 600mW Video Transmitter Features:, Great Range! Light Weight~, Immersion 600mW Video Transmitter Specification:, Dimensions (LxWxH): L,
- Built-in 2CH 5.8Ghz AV output and 1CH AV input ...BevRC
EXTENSION BOARD FOR TELEFLY OSD
,
Extension Board is a attached component of TeleFlyOSD. Including a ...BevRC
YS-X6 MULTI-ROTOR CONTROLLER, THE COOLEST PROFESSIONAL AUTOPILOT
1:Stable and precise altitute and position lock, 2: Ground station based on IOS and Android, 3:, Cool functions you can't get from other controllers, These functions may make YS-X6 so special:, Unlimited waypoint autopilot and auto Return to Lauch(After 15th, June, the number of waypoint will be limit to 4, still enough for most of application), 4: Industrial robust design with military rank hardware, rich expansion interface to offer more possibilities, Includs:,
If you still think the DJI WKM is the best ...BevRC
UPDATING KIT FOR FY31AP----GCS EDITION WITH FY602 DATA RADIO
,
This Pack Contains a set of Data Radio hardware, FY3ZT ...BevRC
GS920 ALL-IN-ONE VIDEO GOGGLE
| Resolution | full color 922K pixels(640*480RGB) |
| Angle of View | 32 degrees diagonal |
| Virtual image size | 80 inches diagonal at 2M |
| Video input/output and Audio input/output jack | 3.5mm |
| Power supply | DC 12v |
Spec:, Supports PAL/NTSC auto system, 2.4G :, 2414,2432,2450,2468,2370,2390,2490,2510MHZ, 5.8G :, 5705,5865,5665,5645,5885,5905,5925,5945MHZ, Your purchase includes:, 1x AIO goggles,
Now u just need one goggle, and u will get ...